DSPIAE ES-A
OneMaster: This is an amazing tool, the sand paper stickers are easy to apply and the fact there are different shapes makes sanding any surface a breeze. Along with this one I recommend the Sponge bits + Dremel or the Spinning Tool for irregular surfaces. These two made a big change in my inventory.
Multiple velocities help a lot for detail work or just grind off parts.
DSPIAE MT-B01 Masking Tape Cutter Red Version
OneMaster: Bought this from another shop, the lid doesn't seal as properly which causes it to fall sometimes, The pole in the middle is too small, even for their own tapes, it basically holds on by friction at the start then just jumps around.
They market it as being able to hold 2 to 3 tapes inside but there is no separator in between, and get stuck together.
I was expecting the "blade" to be a little sharper considering how strong and flexible the tapes are, unfortunately they tend to slip through the spikes and make a mess.
DSPIAE is pretty good, overpriced but pretty good. Unfortunately this isn't one of them.
DSPIAE MT-B01 Masking Tape Cutter Blue Version
OneMaster: Bought this from another shop, the lid doesn't seal as properly which causes it to fall sometimes, The pole in the middle is too small, even for their own tapes, it basically holds on by friction at the start then just jumps around.
They market it as being able to hold 2 to 3 tapes inside but there is no separator in between, and get stuck together.
I was expecting the "blade" to be a little sharper considering how strong and flexible the tapes are, unfortunately they tend to slip through the spikes and make a mess.
DSPIAE is pretty good, overpriced but pretty good. Unfortunately this isn't one of them.
No.57 1/24 Man Hunter Ground Armor Patina Edition Model Kit
OneMaster: Bought the original version a while ago.
Pros:
- Its a quick and fun build
- Many weapons and compartments to open (BUT check cons)
Cons:
- Articulation is barely there, the arms can't move up or down.
- The legs have extra articulation but it won't hold the weight.
- There are a lot of compartments that open for weapons and missiles but they are very hard to open and the plastic clashes with each other.
- The cannons on the back are supposed to point to the front, but its basically impossible to get past the shoulders.
- It feels like they gave up during designing, like it was meant to look different and just left without adjusting what they had previously.

Conclusion: I really like the Zoid-like design, and don't really care that much about posing it, I would've loved to have a little more articulation just to make it feel proper. Its a nice cleanser in between Gundams and Generic Robots.
Dspiae PT-WP Gundam Weathering Wash Panel Line Double-ended Wiping Stick
OneMaster: A package of nail cotton swabs costs as less than $1 for a package of 25. The replacements for these are $3 for 5. The cotton swabs have a smaller point and are harder than these.
The size is pretty small, I do not recommend unless you are considering using it only and only for panel lines. Any other paint will get absorbed by the tip and spread to other parts.
DSPIAE ES-P Portable Electric Sanding Pen
OneMaster: This tool is amazing, the drill bits are good, but using it with the grinding bits is revolutionary (pun intended), Sanding off the gates without leaving scratches in seconds instead of minutes, specially those on irregular surfaces, or hard to reach spots.
U-Star UA-91403 Multifunctional Model Base & Support
OneMaster: Its a good base. pretty heavy but I expected it to have some sort of set of clamps or something to hold on to figures. The fact the arm doesn't have the same connector as the base isn't useful. I had to tape a holder I had from another set to make use of it.
YoloPark x Soskill x B.Duck Spa Duck 19th Anniversary Dark Knight Limited Edition
OneMaster: Amazing figure fun engineering and a real palate cleanser between all the bots and cutesy mechs.
Only issues found were that some of the pieces came loose from the runners, and some broke off so cleaning the nubs was impossible. Manual is pretty good, some issues on the sticker part but nothing serious.
Fully recommend to anyone looking to build something different and fun.
Note: This guy is huge and bulky make sure to make shelf space.
JMS Kunlun Model 1/100 FM01 MG FM Laser Colorful Aerial Model Kit
OneMaster: Pros:
- The Mold is pretty good and fun to build.
- Its a pretty good size and feels premium.
- Optional pieces for the chest and feet (Wasn't expecting them), you even get a small pilot, unsure if its Suleta).

Cons:
- STINKY! I MEAN REALLY! Even after washing, and then passing the pieces through a sonic washer it still smells like burnt plastic
- The fit of the "laser" pieces is a bit tough.
- Doesn't look as good in person as it does in the pictures
- Stickers are just plastic square decals, so applying them ruins the look.
- The manual is messy, and adding the optional pieces is added on extra pages.
- Spreus are labeled but don't match the manual.
HeatBoys HB0018 TMNT Leonardo
OneMaster: Was expecting better quality from Heat Boys, overall the figure looks good on both modes, going in between or posing the robot mode is a different thing entirely.

Pros:
- Looks Good
- Great Accesories
- Attention to detail except QC
- The included base is awesome, will reuse for other figures.

Cons:
- Paint chipping, this figure is 50% paint
- Knees are ridiculously weak, and I don't know if it was the factory or the store but someone placed the screw covers before making sure the joint was tight... Had to drill it out and destroy the cover.
- Panels don't properly align, the top of the vehicle mode is impossible to align without forcing them. Not even youtubers got it right.
- Had to remove plastic on three different pieces to make them fit as the plugs just didn't fit (I even checked with a caliper to make sure I wasn't going mad)
- Transformation is messy, not fun or intuitive. 3 different videos show 3 different ways to fit the arms inside the vehicle mode, some videos even cheated and made cuts as they likely couldn't fit anything properly at first.

From seeing the Heat Boys regular figures I was expecting a lot more QC, Having the HeatBoys HB0012 TMNT Leonardo in hand comparing it to this one, all the wrong joints are tight, the arms are ridiculous, the legs are spaghetti.

If you are going to buy this one, I recommend getting the HB0012 instead and buying a Jada Toys Turtle Party Wagon to stand next to it instead.